CCC4

ENTTEC’s new constant current LED dimmer is a 4-Channel, installation-grade driver. Robust and reliable, ENTTEC’s CCC4 is the ultimate high-precision, constant current (CC) LED dimmer with PLink or DMX input, perfect for high-power installations.

Артикул: 73927

Overview
Features
Connectivity
Specifications
Resources

ENTTEC’s CCC4 is the ultimate constant current (CC) dimmer for high power LED fixtures.

ENTTEC’s CCC4 is a 4-channel, auto-addressable constant current (CC) LED dimmer designed to dim compatible constant current fixtures up to 1A per channel at 12-24V by default. Its ability to automatically adjust to the required current output based on the voltage provided reduces burnout/thermal runaway and creates a light with more consistent brightness, especially for high power lights. Its compact and easy-to-hide, solid state, fan-less design means it’s virtually silent when in operation. Safety features include a user-serviceable blade fuse and DIP switches for mode selection between RGB/RGBW and 8-bit/16-bit.

For optimal performance, integrate the CCC4 with an ENTTEC PIXELATOR series controller and utilise the long-range, auto-addressing PLink protocol. This time-saving solution allows users to simply chain devices together using Cat 6 cable, extending up to 300m and eliminating the need for manually addressing each CCC4.

Or, receive data from DMX controllers, using RDM to set the start address of each CCC4 (default channel 001). For enhanced configuration flexibility, the CCC4 can convert DMX to the PLlink protocol, streamlining the addressing for consecutive CCC4 units in the daisy chain.

This priceless function speeds up installation time as well as working intuitively for installers, even if completely unfamiliar with DMX. Simply connect your CCC4s using the PLink protocol, add power, and the CCC4 LED dimmer will all auto-address themselves. More advanced users can also address and monitor each CCC4 using RDM.

If you’re using a DMX input, simply connect this to the CCC4’s input then link out of it using PLink.

Installing fuses to ensure that a system is safe takes up a great deal of time on site and can add to the space required per dimmer. To combat this, this clever LED dimmer integrates a user-serviceable 5A ATO blade fuse that can be sourced easily and inexpensively to protect against dead shorts. If your installation draws less than 5A you can downrate the fuse to an appropriate level to suit your installation. To learn how to replace the CCC4’s fuse, check out our short instructional video in the download section below.

The CCC4 features built-in mounting points to attach an optional TS35 DIN rail clip (included in the box) to allow you to install it in control cabinets or on surfaces/walls with a DIN rail fitted.

16-bit dimming is increasing in popularity and allows for users to have much finer control over their installation. The mode selection DIP switches allow users to choose between either 16 or 8-bit resolution. Simply pick your desired bitrate, select from either RGB or RGBW LED strip, then you’re all set!

If the CCC4 ever reaches a high operating temperature, it will automatically reduce its output by 50% to prevent overheating and blink the LED Indicator red to notify the user until the device has sufficiently cooled.

MOSFETs are used to dim the LEDs wired to the CCC4’s output. During operation, it’s normal for these components to heat up.
So that this device can run safely at a sustained temperature, our engineers have ensured that all MOSFETs are directly bonded to a heat spreader to transfer heat to a larger area to dissipate better regulate its performance. Be wary of many cheap products that do not allow these components to dissipate heat, severely risking lifetime of your project.

ENTTEC are proud to back up the confidence in our research, engineering and quality control with a 3-year manufacture defect warranty on this product.

Specifications

Connectors	1 x power input (Screw Terminal), 1 x DMX input (Screw Terminal), 1 x PLink In (RJ45) 1 x PLink Out (RJ45), 4 x CC Output (Screw Terminal)
IP rating	IP20
Data input protocols	DMX512A / PLink
Data output protocols	PLink
RDM functionality	Start address configuration, temperature monitoring, firmware updatable
Start address configuration options	PLink using Pixelator series controller / DMX/RDM (Default channel: 1)
Dimming resolution	8/16-Bit
Fixture modes (channel footprint)	8-Bit RGB (3ch), 8-Bit RGBW (4ch), 16-Bit RGB (6ch), 16-Bit RGBW (8ch)
Data input capability per chain	DMX: up to 1 universe / PLink: up to 8 universes
Max. data cable length	DMX: 300m per chain / PLink 300m between each CCC4
Input voltage	12-24V DC
Max. current rating	Max. 4.5A (in 4ch mode)
Max. output power	48W (@12V) / 96W (@24V)
Device max. power draw	1.5W
Max. current per channel	1A
Reverse polarity protection	Yes (from power port only)
Over temperature protection	Yes (output intensity will dim to black over 3 seconds, dim back to the received value once temperature has dropped)
Pulse Width Modulation (PWM) frequency	1KHz – fixed
User-serviceable fuse	ATO 5A blade fuse
Cooling method	convection
Operating temperature	-20°C to +50°C / -4°F to 122°F
Environmental operating humidity	5- 95% (non-condensing)
Mounting options	Surface & TS35 DIN-rail mount
Body material	ABS plastic
Unit dimensions	88mm x 117.5mm x 31.5mm
Unit weight	0.13kg / 0.28lbs
Shipping dimensions	140mm x 140mm x 40mm
Shipping weight	0.19kg / 0.42lbs
Warranty	3-year return to the base manufacturer warranty
Compliance	RCM (Aus/NZ), CE / WEEE (EU), UKCA (UK), FCC (USA)

Resources

CCC4 datasheet

CCC4 Installation Guide

CCC4 technical drawing

CCC4 Hi-Res images

CCC4 Firmware v1.0

CCC4 Release Notes

How to replace the CCC4’s fuse (video demonstration)

Projects featuring ENTTEC LED dimmers

See All Projects

Get in Touch

Enquire about the CCC4

Explore the CCC4: Connect with our team to discuss your project needs and let us tailor a solution for you with pricing in 24-48 hours. Contact an expert now or subscribe to our newsletter for the latest updates and insights.

Find out more